Washing Your Evaporator Coil Before Blower Installation

You need to check and see whether your evaporator coil is free from any impurities before you install the blower. The fan is still a reliable method of cooling, but if the coil is dirty, the performance of the blower will be hampered. So before you install the blower, you should take care of the coil’s condition. There are some simple ways of doing this, so you can have a clean fan and enjoy cool air in your house.

The first thing that you need to do is wash your hands very well before you wash the evaporator coil. This is a step which has been recommended by professionals who have done this before. Then you need to use the hose with clean water and wash it well with it. You need to wash the entire coil thoroughly, and not just parts of it. Then you need to rinse it very well using clean water.

You should then wash the blower after you have done the washing. There are many types of blowers available in the market today, but you need to look for the best blower for your system. If you have used a gas blower, you need to buy a gas blower with an inner ring and a coil guard as well. The inner ring will prevent any impurities from entering the coil as you use the blower. After you have washed the blower, you should fill it with enough water and seal it. You can then hang it up and leave it overnight, if possible. If you have used an electric blower, you can also use an electric blower to wash the coil.

This entry was posted in Uncategorized. Bookmark the permalink.