If you have an air compressor and if you constantly hear a loud noise when using it then the compressor may be defective. The parts of your compressor are cheap and can be found in any appliance store. The problem is that some air compressors have short circuited wires which results in a very loud noise every time the compressor is used. If this is the case then you will have to replace the compressor immediately. In this article, I will give you some simple steps on how to replace the compressor.
First of all, you will need to take out the electrical board from the inside of the air compressor. This is because some compressors have short circuited wires inside the compressor which is causing the loud noise. After this, you will need to cut the wire while removing the air blower hose. If the blower hose is attached with some kind of machine then you will have to disconnect it first before doing this. After cutting the wires, you will need to put a pin or screws at the edge of the old compressor to hold it in place while installing the new one.
After this, you will have to remove the old compressor and insert the new compressor on its place. Next, you will need to connect the wires that lead to the fan. Then you will need to remove the screws and install the new air compressor. Finally, you will have to put the new filter in the blower area and put the original blower hose on the old one. Now you will hear a soft sound when using the air compressor. You can now use it without having to worry about loud noises. Do not forget to follow all these steps so that you can prevent any accidents at home.