What You Need to Know About Condenser Coil Replacement

condenser coil replacement

What You Need to Know About Condenser Coil Replacement

When you have a condenser coil that is getting very hot, it can damage your insulation and your ceiling. Most of the time when this happens the problem is inside the power supply, not your actual condenser coil. When you install a new unit, you may find that you need to replace it with a new one, and that it comes with new insulation, not the old one that is starting to get bad. This is why most people will call an electrician to perform a condenser coil replacement. To remove the old one, it is not hard to do, however, and many people are afraid to try to put the old one back in. Sometimes when the replacement unit is installed, the installer will use this thing to hold down the old one.

So if you remove the old coil and try to put the new one in it will not work correctly. Instead of pushing the old one out, you will have to put the new one in. The easiest way to put the new coil in is to use an electric screwdriver to push it in and turn it until it is snug. When you find that the screwdriver is loosening the cover plate you will be able to pull it off and then replace it with the new one.

You should make sure that the coil is tight before you install it. If it is not, you could end up damaging the insulation and your roof. Make sure that you get a new coil and install it properly. This will save you from a lot of problems that can come about by an installation. This is something that you do not want to be replacing all the time, and if it happens to break.

This entry was posted in Uncategorized. Bookmark the permalink.