How To Test An Oscillating Sine Wave Generator Or Condenser Test?
If you are unsure what your oscillating sine wave generator or condenser test is doing then I’ll show you a short video that you can view on YouTube. By looking at this video I think you will see that your oscillating sine wave generator is not working properly and it is time to replace it. While checking the circuits in the oscillating sine wave generator, I noticed that the battery and the power supply were not allowing the batteries to charge enough. If the batteries were charging while running on the wall then you would be getting a full battery.
By looking at the second picture, you will see that I made a mistake when checking the circuit on the oscillating sine wave generator. I am sure that if you take your time to look at the circuit diagram that is on the oscillating sine wave generator then you would notice that the battery and the power supply are not connecting to the positive and negative terminals. Therefore, there should be a wire that connects the negative terminal of the battery to the negative terminal of the power supply.
By looking at the third picture, you will see that the power supply is not working correctly and it is time to change it out for a new one. Another thing that you should be looking at is the battery that the oscillating sine wave generator is connected to. You should be able to see in the fourth picture that the battery is not being charged anymore because the voltage is just dropping. The reason why the voltage is dropping is because the battery does not have enough power supply to charge the batteries. You should also be able to see that the power supply is not providing a full battery charge because the capacitor has dropped down to zero.