Evaporator Coil Blower – Problems Associated With an Evaporator Coil

The evaporator coil blower is an essential component of your cooling system. The evaporator is an important part of the cooling system as it takes warm air from the compressor and sends it to the condenser, which then condenses water into cool liquid. If the condenser is not working properly, the chances listed below are checked at a time. If the condenser is not running properly, then it may be necessary to replace it or have it repaired. When the condenser is not working properly, it may be necessary to get the refrigerant piping replaced. A faulty condenser can lead to a slow running unit and the chances listed below.

The evaporator coil blower is the only component in your cooling system that has to work continually all of the time. The temperature control valves on the evaporator coils must be checked at least once a year. A faulty evaporator will lead to slow running appliances and poor performance. It may also lead to high pressure in the condenser. High pressure in the condenser can cause the refrigerant to run out, causing poor performance in your appliance. If the evaporator is not working properly, you should check the refrigerant pressure, if it is too low in the tank. The coolant that comes out of the condenser is also very important, since the refrigerant can make up for the pressure in the tank.

There are several places on the evaporator coil blower that are susceptible to wear and tear. The refrigerant lines and refrigerant tubing, the evaporator fan and condenser coil, and the refrigerant hose that runs from the condenser back to the refrigerant tank must all be inspected at least once a year. An evaporator that is not functioning properly, overheats, or is clogged can cause a slow running unit. The chances listed above are only a few of the problems that can occur when an evaporator is not functioning properly. If you are having trouble with an appliance, then the chances listed above are probably the ones that are wrong. causing the problem. You can determine the problem by looking at the evaporator and checking the refrigerant lines, then calling in a technician for help.

This entry was posted in Uncategorized. Bookmark the permalink.