The condenser unit location is very important for the performance of your system. Although most condenser units are small, but they still have to run through a loop of tubing to get to the house. That’s why you should choose a place that will not only save space for you, but also will allow you to maximize the performance of your home water filter. Also, the location of the unit is very important. First off, you want to look for a place that has good air circulation around it.
There are two things that you have to consider when you’re choosing the right location for your system. First of all, the condenser needs to be located where the air circulation is good enough to avoid condensation. The other thing you have to consider is the current moisture in the air. In order to ensure that you have the best condenser performance, you need to avoid placing your condenser unit near trees, buildings, and chimneys. If you place your system near these types of sources, it will not get enough air circulation.
In addition to the two things mentioned above, the condenser unit location is also very important when you are choosing the kind of filtering system that you will use. Water softening systems, for example, require a condenser with a cooler outside. For a wet sink, a fan blowing directly on the system is good enough. If you don’t want to deal with fans, you can install a point of entry device in your kitchen and use that instead. Then again, if you’re going to filter your own water, you don’t need a fan inside of your home anyway, so you won’t have to pay extra for a fan.