Condenser blowing cold air is one of the best ways to cool off a hot summer day and it is easy to understand and do at home as well. There are three main steps to consider when using a blow dryer to cool your home. First, you must remove the existing blockage in the system so that it will release any excess built-up heat. Next, you must check the system for any other leaks. The third step is to add a layer of hot air to the evaporator coil to raise the temperature of the room. Once the coil is heated, you will want to place it back in place and allow the system to run for about thirty minutes to heat up the coils. Finally, you will want to turn the unit off and place the blow dryer over the coil in order to cool the area.
While the oil is heating up, it will continue to draw in warm air from outside to keep the rooms warm. The warm air is sucked into the evaporator coil, where it causes the coil to heat up and raise the temperature of the room. This process is called evaporation. If you are having problems with your evaporator coil, you will find that condenser blowing cold air will help to clear it out. After all the coils are warmed up, you will want to place the evaporator coil over the coil in the blow dryer and allow the system to run until it reaches the desired temperature. When you are done blowing the air through the system, you will want to turn off the blower and place the blow dryer over the coils again in order to bring them down to their proper levels again. Once you have completed all three steps you will find that your home is much cooler than before and you will feel more comfortable in it too.